E. Jordan Brookes Call 800.326.3376
Request a Quote
  

Torlon and Duratron (PAI)

PAI is the highest performing, melt processable plastic. It has superior resistance to elevated temperatures. It is capable of performing under severe stress conditions at continuous temperatures to 500 degrees Fahrenheit. Parts machined from PAI stock shapes provide greater compressive strength and higher impact resistance than most advanced engineering plastics.

  • Duratron T4203 PAI Click Here to Buy Duratron T4203 PAI Rod Online   Click Here to Buy Duratron T4203 PAI Plate Online
    Torlon and Duratron (PAI) • Extruded Grade •Yellow Color
    Duratron T4203 PAI offers the best toughness and impact strength of all Duratron PAI grades. This extruded grade is very popular for precision parts in high-tech equipment. In addition, its good electrical insulating ability provides numerous possibilities in the field of electrical components. Compression moulded Duratron T4503 PAI is similar in composition to Duratron T4203 PAI, and is selected when larger shapes are required. See also Torlon 4203.

  • Duratron T4301 PAI Click Here to Buy Duratron T4301 PAI Rod Online   Click Here to Buy Duratron T4301 PAI Plate Online
    Torlon and Duratron (PAI) • Extruded Grade •Black Color
    This Duratron PAI is primarily used for wear and friction parts. It offers a very low expansion rate, low coefficient of friction and exhibits little or no slip-stick in use. Duratron T4301's flexural modulus of 1,000,000 psi, is higher than most other advanced engineering plastics. This grade excels in severe service wear applications such as non-lubricated bearings, seals, bearing cages and reciprocating compressor parts. See also Torlon 4301.

  • Duratron T5030 PAI
    Torlon and Duratron (PAI) • Extruded Grade •Natural Color
    Duratron T5030 PAI is 30% glass-reinforced. It offers high rigidity, retention of stiffness, a low expansion rate and improved load carrying capabilities. This grade is well suited for applications in the electrical/electronic, business equipment, aircraft and aerospace industries. See also Torlon 5030.

  • Duratron T5530 PAI
    Torlon and Duratron (PAI) • Compression Molded Grade •Natural Color
    Duratron T5530 is 30% glass-reinforced. It is ideal for higher load structural or electronic applications. This grade is similar in composition to Duratron T5030 PAI. It is selected for larger shapes or when the greatest degree of dimensional control is required.

  • Duratron T7130 PAI
    Torlon and Duratron (PAI) • Extruded Grade •Natural Color
    Duratron T7130 PAI is 30% carbon fiber-reinforced. It offers exceptional stiffness, nonabrasive wear performance and the lowest coefficient of thermal expansion of all materials profiled in this guide.

NOTE: The information contained herein are intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. It is given without obligation or liability. Contact us for manufacturers' complete material property datasheets.

Customer Service Agent  Need help selecting the right plastic for your specific requirement? Call us today at (800) 326-3376.

SESSION: